Call Ken for all your High Power needs. Performance Hobbies Webstore.

accessories
Motors
Electronics
Recovery
Rocket Kits
accessories
Rocket launches
Tech Info

Product Search

Visa Master Card discover.gif (1234 bytes) novus.gif (1310 bytes)

Gift Certificates Available!

Email Ken

Cell:(202)723-8257

Competitive discounts without having to pay a club membership fee.

Hawk Mountain Rocket Kits

Hawk Mountain rocket kits include fiberglass airframes and high quality parts.

Rocket Kits

View Cart | Check Out

ITEMWeight Diameter Length Motor Mount PRICE
Raptor
Picture above.

All fiberglass, 3 fins 0.093" thick, Kevlar Shock Cord and Parachute Heat Shield, 18" X-Form parachute

14 oz.1.3" 49" 29mm $89.00Out of stock
Raptor 12" Payload bay $17.95Out of stock
Raptor Fiberglass Motor Mount $7.35Out of stock
Transonic I
Click here for picture
The Transonic is a 38mm minimum diameter rocket that utilizes a DuPont Zytel fiberglass reinforced fin canister with a filament wound glass epoxy airframe. A two piece motor retainer machined from 6061 T6 aluminum anodized for wear and corrosion is included in the kit. Just slide motor in & thread on retainer cap and you`re ready to go. This rocket is capable of reaching 2,800 feet using just an H242T motor. If you really want to go for it, use a J570. You`re looking at about 8,600 feet and Mach 1.16. Your performance will vary depending on rocket weight, finish and weather at the launch site.
40 oz38mm57"38mm$179.00Out of stock
Transonic II
Click here for picture (picture shows rocket with MDR unit)
The Transonic II is a 54mm minimum diameter rocket that utilizes a DuPont Zytel fiberglass reinforced fin canister with a filament wound glass epoxy airframe. A two piece motor retainer machined from 6061 T6 aluminum anodized for wear and corrosion is included in the kit. Just slide motor in & thread on retainer cap and you`re ready to go. The Transonic II features a fiberglass nosecone with built in 38mm payload section! The payload sesction can accommodate the ALTS2 or similar altimiters. This is a very high performance rocket, capable of reaching altitudes over 14,000 feet and Mach 1.4 with an Aerotech K550W! Even higher altitudes and speeds can be obtained using Kosdon or similar high performance motors. Optional MDR unit is highly recommended if you plan on using motors larger than a J.

The MDR system includes a 24" fiberglass airframe with piston ejection system, threaded airframe coupler with new machined aluminum parts! so you can simply screw your airframes together, 8" long fiberglass altimiter/LES holder and kevlar shock cord. This option is highly recommeded for the Transonic II because of the extreme altitudes this rocket is capable of. Transonic II with MDR system is 87.5" long.

40 oz54mm59"54mm$199.00Out of stock
Transonic II Fiberglass Nosecone$20.00Out of stock
Transonic II 12" Payload Section$15.00Out of stock
Transonic II MDR Unit$175.00Out of stock
Project Pack
With this project pack you can build a "real" fiberglass rocket for the price of a cardboard one! The project pack includes evereything you need to build a 5` fiberglass rocket at a price that is competitive with cardboard.

Project Pack consists of the following:

  • 36" Long 2.93" woven fiberglass airframe
  • 12" Long 2.93" woven fiberglass airframe
  • Fiberglass Nosecone
  • Fiberglass coupler tube
  • 38mm Motor Mount
  • square foot of FR-4 Fin Material
  • Kevlar Shock Cord
  • Centering Rings
  • Coupler Bulk Plate
$89.00Out of stock
Jumanji
Click here for picture
New Longer Length! The Jumanji is a 4" fiberglass rocket utilizing a piston ejection system. This rocket is fun and easy to fly, and because it`s fiberglass it will last. The rocket comes standard with a Rocket Man parachute, which is one of the best chutes you can get for High Power rocketry. The kit includes a specially modified fiberglass nose cone with a built in payload section, eliminating the need for bulky conventional payload sections. The Jumanji utilizes a 54mm fiberglass motor mount.
104 oz4"77"54mm$325.00Out of stock
Jumanji with Dual Deployment
104 oz4"77"54mm$549.00Out of stock
Jumanji tailcone assembly$49.00Out of stock
Jumanji 3" Fiberglass Motor Mount$44.00Out of stock
Bad Attitude
Click here for picture
The Bad Attitude is a 4" rocket that is designed for experienced fliers and utilizes minimal drift recovery. With MDR the motor ejection charge and or altimeter will eject the drogue chute with your timer or altimeter used for the main chute. The Bad Attitude is equipped with a piston ejection system in the main chute tube. This rocket can also be flown using the motor ejection charge for main chute deployment for low altitude flights. The rocket comes with a 24" long 54mm-fiberglass motor mount, but is also available with an optional 32" long 3" motor mount and can be flown with up to an M motor! Electronics bay coupler screws into payload section using Threaded Machined Aluminum parts! Also included in kit is a "very heavy duty" machined aluminum ejection charge holder and key switch to turn everything on.
168 oz4"101"54mm$545.00Out of stock
Bad Attitude 3" Motor Mount$30.00Out of stock
Fiberglass Talon 3
$285.00Out of stock
Fiberglass Talon 3 with Dual Deployment (MDR)
$465.00Out of stock
Fiberglass 3.9" Nike Smoke
4"$199.00Out of stock

Rocket Kits

View Cart | Check Out

Email Ken or call us at (202)723-8257
The Performance Hobbies Website is maintained by WebMaster
Hosted by The Blast Zone

Return Policy:
No refunds or exchanges once product has shipped.
If a product proves to be defective at an event we attend we’ll replace it according to warranties covered by manufactures products.